|
Foot Mounted Motor |
Flange Mounted Motor |
Face Mounted Motor |
2 Pole& 4 Motors |
6 Pole& 8 Motors |
Mechanical Features |
Non standard motors |
Features
- Speed: 750 / 1000/ 1500/ 3000 rpm
- Volt: 42v/48v/110v/220v/380v/440v/670v
- Special motors to use with invertors
- Fitted with SKF Bearings
- Duty cycle S1, S2, S3, S4 & S7
Application
- Compressors, Blowers, Fans
- Vacuum pumps, Air curtains
- Printing Machinery
- Knitting Machines
- Drilling Machines
- Buffing & Polishing Machines
- Mosaic floor polishing machines
- Grinders
Standards
| IS:325 | Three phase Induction motors-specification. |
| IS:900 | Code of practice for installation and maintenance of Induction motors. |
| IS:1231 | Dimensions of Foot mounted A.C. Induction motors. |
| IS:2223 | Dimensions of Flange mounted A.C. Induction motors. |
| IS:4029 | Guide for testing Three phase Induction motors. |
| IS:4691 | Degree of protection provided by Enclosures for Rotating Electrical Machinery. |
| IS:6362 | Designation of Methods of Cooling for Rotating Electrical Machines. |
| IS:12065 | Permissible limits of noise level for Rotating Electrical machines. |
| IS:12075 | Mechanical Vibration of Rotating Electrical machines |
| IS:12615 | Energy Efficient Induction Motors Three phase Squirrel Cage. |
International Standards
| IEC 60034-1, 5 | Rotating Electrical Machines – Rating and Performance, Degrees of Protection |
| IEC 60072 | Dimension and output ratings of Rotating Electrical machines. |
- Insulation – Class F
- Supply – 415v, 50Hz
- Standard cooling – Totally enclosed fan cooled
- TENV on request
- External forced cooling on request
- Enclosure – (IP 54 or IP 55 on request)
Stator Frames and End Shields
- These are rugged components of cast iron confirming to IS 210
- The stator frames are of deep fin construction to ensure adequate cooling surface
Terminal Box
- Terminal box is located on the right hand side of the motor when viewed from ‘D’ end
- The terminal box is turnable at 90o to permit cable entry from any direction
- Multi mount option is available on request
Rotor and Shaft Assembly
- Pressure die-cast aluminium rotors
- Dynamically balanced for vibration free operation
Stators
- All copper windings, copper wires confirm to IS 4800 – Part V
- Surge tested for short grounds and phase unbalance
- Multiple dips protect against heat, moisture and contaminants
- Wound Stators are Vacuum Impregnated with high temperature insulating varnish. A final dip in red epoxy insulating enamel provides a protective over coat
- 80 Frames is available with multimount option
Insulation
- class F
- Non-hygroscopic, high dielectric and mechanical strength
- Epoxy coating provides additional protection
- Class H on request
Bearing
- Cast iron housing
- Double side shielded bearing upto 100 frame
- Pre-packed lubricants from SKF BEARING
Testing
- All motors are tested in the course of manufacture and before dispatch as per relevant Bureau of Indian Standards (IS 325) and EN60034-1
Ranges
- Range : 0.18 KW (0.25 HP) to 22 KW (30 HP)
- Speed : 350/500/750/1000/1500/3000 rpm
Standard Motors
|
K.W |
H.P |
2 Pole |
4 Pole |
6 Pole |
8 Pole |
|
0.09 |
0.125 |
56 |
56 |
71 |
71 |
|
0.12 |
0.16 |
56 |
63 |
71 |
71 |
|
0.18 |
0.25 |
63 |
63 |
71 |
80 |
|
0.25 |
0.33 |
63 |
71 |
71 |
80 |
|
0.37 |
0.5 |
71 |
71 |
80 |
90S |
|
0.55 |
0.75 |
71 |
80 |
80 |
90L |
|
0.75 |
1.0 |
80 |
80 |
90S |
100L |
|
1.1 |
1.5 |
80 |
90S |
90L |
100L |
|
1.5 |
2.0 |
90S |
90L |
100L |
112M |
|
K.W |
H.P |
2 Pole |
4 Pole |
6 Pole |
8 Pole |
|
2.2 |
3.0 |
90L |
100L |
112M |
132S |
|
3.7 |
5.0 |
100L |
112M |
132S |
160M |
|
5.5 |
7.5 |
132S |
132S |
132M |
160M |
|
7.5 |
10.0 |
132S |
132M |
160M |
160L |
|
9.3 |
12.5 |
132M |
160M |
160L |
180M |
|
11.0 |
15.0 |
160M |
160M |
160L |
180L |
|
15.0 |
20.0 |
160M |
160L |
180L |
200L |
|
18.5 |
25.0 |
160L |
180M |
200L |
225S |